Chapter 4 Standard Mode
4-5 NWA-033628-001 Rev.1.0
[Implement] Category
[Implement] Category
The [Implement] category is organized into two submenus as followings:
• Quick Setup Page 4-5
• Blade Configuration Page 4-27
Quick Setup
The [Quick Setup] menu lets you complete default setting, the system clock, IP address, station and trunk
on the SV8300 (unit number 01) in easy procedures based on onscreen guidance. Follow these steps:
STEP1: Take one of these actions:
• Click submenu [Quick Setup] in Standard Mode.
• On the Main Menu, click [Edit] > [Quick Setup] in order.
• Click on the toolbar.
Displays [Quick Setup] screen in the work window.
STEP2: Proceed with each default setting in the order of buttons.
For subsequent operations, refer to the detailed explanations of the individual buttons.
[Quick Setup]
Menu
[1] button
[2] button
[3] button
[4] button
[5] button
[6] button
[7] button
[Completion] button
To Next Page
Loading...
