INTRODUCTION
2 NWA-033628-001 Rev.1.0
Outline of This Manual
Outline of This Manual
This manual consists of eight chapters and three appendixes. The following paragraphs summarize chap-
ters 1 through 8 and Appendixes A, B and C.
CHAPTER 1 PCPro Overview
Provides introductory information about PCPro and proceeds to describe its system
configuration, operating environment, working conditions and more.
CHAPTER 2 Setting Up the PCPro
Explains how to connect the SV8300 and PCPro, how to install, launch and exit the
application, establish a communication link between the SV8300 and the PCPro.
CHAPTER 3 PCPro Window Layout
Explains the PCPro window layout, submenus on the screen and the function of the
work window, etc.
CHAPTER 4 Standard Mode
Explains the functions that can be configured in Standard Mode and how to operate
them.
CHAPTER 5 System Data Mode
Explains how to use System Data Mode.
CHAPTER 6 Command Mode
Explains how to use Command Mode and the operational screens.
CHAPTER 7 Reporting
Explains how to view fault information the result of system data, system
configuration information and a log of system data upgrades stored on the SV8300
from PCPro in a report format.
CHAPTER 8 Settings
Explains how to configure PCPro to communicate between the SV8300 and PCPro,
and configure the environment.
APPENDIX A Main Menu and Toolbar Correspondence
List of menu bar function, toolbar functions and the associated shortcut keys.
To Next Page
Loading...
