Chapter 4 Standard Mode
4-34 NWA-033628-001 Rev.1.0
[Implement] Category
Deleting Blade Information
To delete information about a blade registered in the SV8300, follow these steps:
STEP1: Select a unit number in Unit No. field.
STEP2: Click the [Read] button.
Blade information is read from the SV8300 having the unit number specified in the Unit
Number field, and information about the blades mounted in the SV8300 is displayed in the
Blade Display Area of the [Blade Configuration] screen.
STEP3: Click the [OK] button.
STEP4: Right-click the slot you want to delete blade information from in Blade Display Area.
A right-click menu is displayed.
STEP5: Click [Delete Blade] on the right-click menu.
The blade information is deleted from the slot in the Blade Display Area.
NOTE: By now, all blade information has been deleted, including the information registered in the
[Blade Configuration] screen.
Blade information has now been deleted.
[OK] button
Right-click
menu
[Delete Blade]
menu
To Next Page
Loading...
