Chapter 4 Standard Mode
4-85 NWA-033628-001 Rev.1.0
[Maintenance] Category
Loading System Data
You can load the system data saved onto PCPro into the SV8300 in these steps:
NOTE: Before applying system data that has been loaded into the SV8300, be sure to make a back
up of the data and reset the system in Steps 5 and 6. If the SV8300 is powered off or a system
data back up is executed without first executing a system reset, the loaded system data would
be lost.
STEP1: Click [Load] button in the [System Data Save/Load/Verify] screen.
The [Load] screen is displayed in the work window.
Return to the [Load] screen to confirm.
Continued on next page
No. Item Description
(1) Select the File Name field Displays the specified folder and file name.
(2) File
Informa-
tion field
Date/Time field Displays the Date & Time at which the specified system
data file was saved.
Office Name field Displays the registered office name when the system data
was saved.
(2)
(3)
(1)
[Load] button
[Select File] button
[<< Back] button
To Next Page
Loading...
