Chapter 4 Standard Mode
4-14 NWA-033628-001 Rev.1.0
[Implement] Category
Station Setting (CM05/CM10/CM12/CM77)
Register LC/DLC blades, and set the station number of a Single Line Telephone or Digital Multiline
Terminal and relevant data in these steps:
STEP1: Click the [5] button in the [Quick Setup] screen.
The [5. Setting of Station] screen is displayed in the work window.
STEP2: Right-click on the slot in which you are about to register the LC/DLC blade in Blade Display
Area.
Right-click menu is displayed.
No. Item Description
(1) [Zoom In] button Right click to register the selected blade in the Blade Display Area.
(2) Blade Display Area Displays the slot configuration of SV8300. Registers the LC/DLC
blades on the SV8300.
(1)
(2)
[OK] button
Right-click menu
To Next Page
Loading...
