NEC Univerge SV8300 - Program Upgrade (On-Line

Chapter 3 PCPro Window Layout
3-5 NWA-033628-001 Rev.1.0
Main Menu
Continued on next page
No.
Menu
category
Menu choice Function
Reference
Page
(3) System Mainte-
nance
Status
Display
(Blade/
Trunk)
Displays the screen for confirming the
status of blades mounted in the SV8300
or each trunk (idle/busy/etc.).
Page 4-74
Program
Upgrade
(On-line)
Displays the screen for upgrading CPU
software.
Page 4-49
Program
Upgrade
(Off-line)
Displays the screen for upgrading CPU
software.
Page 4-60
Trace
Informa-
tion...
Displays the screen for confirming trace
information transmitted from the
SV8300 randomly.
* This menu is reserved for NEC techni-
cians and need not be used in most sit-
uations.
Page 6-12
(4) Edit Standard Switches the submenu view to Standard
Mode.
Page 4-2
System Data Switches the submenu view to System
Data Mode.
Page 5-2
Command Switches the submenu view to Com-
mand Mode.
Page 6-2
Quick Setup Displays the screen for executing the
quick setup process.
Page 4-5
Blade Configuration Displays the screen for registering
blades on the SV8300.
Page 4-27