Chapter 4 Standard Mode
4-50 NWA-033628-001 Rev.1.0
[Upgrade] Category
NOTE 4: You can confirm the status of program upgrade by the S1 lamp of CPU blade.
Set a Schedule
You can enter and read FTP server information, the upgrade date and time and change over date and
time for each unit on which the CPU program is upgraded.
STEP1: Click the [Scheduling] tab.
The [Scheduling] screen is displayed.
Upgrade Status
S1 Lamp Status
(Green)
Under Upgrading Flash quickly
Program upgrade is completed Remain Lit
Program changeover is completed Disappear
Upgrade fails/Upgrade is interrupted Flash normally
Under program copying from upgraded side to outdated side Flash slowly
Program copy from upgraded side to outdated side is completed Disappear
(1)
(7)
(6)
(2)
(3)
(4)
(5)
To Next Page
Loading...
