Chapter 4 Standard Mode
4-20 NWA-033628-001 Rev.1.0
[Implement] Category
Trunk Setting (CM05/CM10/CM30)
Register a trunk line blade and configure relevant trunk data.
STEP1: Click the [7] button in the [Quick Setup] screen.
The [7. Setting of Trunk] screen is displayed in the work window.
STEP2: (2) Right-click the slot of the trunk line blade to be registered in the Blade Display Area.
Right-click menu is displayed.
No. Item Description
(1) [Zoom In] button Click to display a preferences screen for the blade selected in the Blade
Display Area.
(2) Blade Display Area Displays slot configuration of the SV8300. Registers the trunk line
blades mounted in the SV8300.
(1)
(2)
[OK] button
Right-click menu
To Next Page
Loading...
