Chapter 4 Standard Mode
4-66 NWA-033628-001 Rev.1.0
[Tools] Category
[Tools] Category
The [Tools] Category is Script submenus.
Scripts
The [Script] menu allows you to run a system data script. Create a system data script as a CSV file and
load it into the Main Menu via the [Script] menu.
Do either of the following to see the [Script] screen in the work window:
• Click [Script] on the standard mode submenu.
• On the Main Menu, click [Tools] > [Script] in this order.
• Click on the toolbar.
NOTE: - Establish an Establishing a Link before running the Error Info function. For more details,
see “Establishing a Link”. Page 2-12
- There is no need to establish a link when writing a script.
- Write a script file as a CSV file.
- Up to 10,000 lines of scripts can be run simultaneously (depending on the specifications of
the PC and memory installed).
- NEAX 2000IPS script files cannot be used.
(5)
(7)
(4)
(3)
(2)
(1)
(6)
(8)
(10)
(9)
To Next Page
Loading...
