Chapter 2 Setting Up PCPro
2-17 NWA-033628-001 Rev.1.0
Exiting PCPro
Exiting PCPro
To exit PCPro, follow these steps:
STEP1: Clear the communication Link to the SV8300.
For information on clearing the communication link, see “Clearing the Communication Link”.
Page 2-15
STEP2: Perform either of the following procedures:
• Click [x] (Close) in the upper right corner of the [PCPro] window.
• On the Main Menu, click [File] > [Exit] in this order.
The [PCPro] window closes. If a communication link to the SV8300 is in existence, the [Dis-
connect] dialog box is displayed. Clear the connection.
PCPro has now exited.
[Close] button
[Exit]
To Next Page
Loading...
