Chapter 4 Standard Mode
4-81 NWA-033628-001 Rev.1.0
[Maintenance] Category
System Data Save/Load/Verify
The [System Data Save/Load/Verify] menu makes it possible to:
• Save : Saves system data registered on the SV8300 to PCPro.
• Load : Loads system data saved on PCPro into the SV8300.
• Verify : Compares system data registered on the SV8300 with system data saved on PCPro.
One of the following action will display [System Data Save/Load/Verify] screen in the work window.
• Click submenu [System Data Save/Load/Verify] in Standard Mode.
• On the Main Menu, click [System] > [System Data Save/Load/Verify] in this order.
NOTE 1: Establish a communication link with the SV8300 before proceeding with software license
authentication.
For how to establish a communication link, refer “Establishing a Link”. Page 2-12
NOTE 2: While saving, loading or verifying system data, do not attempt to write and read system data to
and from the SV8300 by using CAT or any other application.
No. Button name Description
(1) [Save] Click to save system data. The [Save] screen is displayed.
(2) [Load] Click to load system data. The [Load] screen is displayed.
(3) [Verify] Click to verify system data. The [Verify] screen is displayed.
(1)
[System Data Save/Load/
Verify] menu
(2)
(3)
To Next Page
Loading...
