Chapter 4 Standard Mode
4-75 NWA-033628-001 Rev.1.0
[Maintenance] Category
Status Display of Blade
You can confirm the status of blade operation with the lamp indication screen.
STEP1: Check the radio button on the [Status Display (Blade/Trunk)] screen.
STEP2: Check the [Next] button.
The [Status Display of Blade] screen appears on the work window.
Continued on next page
No. Item Description
(1) [Read] button Click to read a blade information from the SV8300 having its unit
number and slot number specified in (4) and (5).
(2) [Reset] button Click to reset the blade specified by (4) and (5).
(3) [Return] button Click to return the [Status Display (Blade/Trunk)] screen.
(4) Unit No. field Select the unit number of blade from which you want to display the
status.
• 01 to 50 (default: 01)
(5) Slot No. field Select the slot number of blade from which you want to display the status
• 01 to 18 (default: 01)
(6) “Auto Update” check
box
Check to do the Auto Update.
(6)
(4)
(7)
(1)
(3)
(8)
(2)
(5)
To Next Page
Loading...
