Chapter 4 Standard Mode
4-10 NWA-033628-001 Rev.1.0
[Implement] Category
STEP3: Click the [OK] button.
You are directed back to the [Quick Setup] screen. Checked mark appears to the right of but-
ton [2].
The Date/Time and the language have now been set.
IP Address Setting (CM0B)
Set the IP addresses of the SV8300 (CPU blade) and the RTP port (VoIPDB blade) in these steps:
STEP1: Click the [3] button in the [Quick Setup] screen.
The [3. Setting of IP Address] screen is displayed in the work window.
No. Item Description
(1) Setting of Date/
Time (CM02) check
box
Mark the check box to adjust the setting of the SV8300 to the Date/
Time of the PC displayed on the screen (default: checked).
(2) Setting of Language
of the Multiline Ter-
minal (CM04) field
Choose the language displayed in the LCD of Multiline Terminal.
- Japanese
- English
- French (CANADIAN)
- Spanish (LATIN AM.)
- Portuguese
(LATIN AM.)
-German
- Italian
- Netherlandish
- French (Europe)
- Spanish (Europe)
- Portuguese
(Europe)
-Swedish
-Danish
- Catalan
- Japanese Kanji
-Russian
- English (Default)
To Next Page
Loading...
