Chapter 4 Standard Mode
4-21 NWA-033628-001 Rev.1.0
[Implement] Category
STEP3: On the right-click menu, click the trunk line blade mounted in the slot.
The blade name is displayed on the slot in the Blade Display Area.
STEP4: Click the [Zoom In] button.
The [7. Setting of Trunk> Zoom In] screen is displayed in the work window.
STEP5: Set item (4).
Right-click menu Description
Trunk (COT) Choose one of the following combination of COT blade (Central office
trunk) mounted:
• COT(4+4): CD-4COTB + PZ-4COTF
• COT(4) : CD-4COTB
Trunk (BRT) Choose one of the following combination of BRT blade (BRI trunk)
mounted:
• BRI(4+4) : CD-2BRIA + PZ-2BRIA
• BRI(4) : CD-2BRIA
Trunk (PRT) Choose the PRT blade (PRI trunk):
•PRT: CD-PRTA
Delete Blade Click to delete the blade information setting in the slot.
(2)
(4)
(3)
(1)
[OK] button
To Next Page
Loading...
