Chapter 4 Standard Mode
4-4 NWA-033628-001 Rev.1.0
Using Standard Mode
Submenu
category
Menu choice Description
Reference
Page
Maintenance System Configura-
tion Display
A screen appears displaying the system
configuration of the SV8300 in a HTML
report.
Page 4-71
Status Display
(Blade/Trunk)
Displays the screen for confirming the
status of blades mounted in the SV8300 or
each trunk (idle/busy/etc.).
Page 4-74
Fault Display Displays the screen for confirming infor-
mation about faults present on the SV8300.
Page 4-79
System Data Save/
Load/Verify
Displays the screen performing any of the
following operations:
• Save registered system data on the
SV8300 to PCPro.
• Loads the system data saved on the
PCPro into the SV8300.
• Compares the system data saved on the
SV8300 and that saved on PCPro and
checks for differences between the two
copies of the data.
Page 4-81
Reset Displays the screen for reset the CPU and
blade reset.
Page 4-92
To Next Page
Loading...
