Chapter 4 Standard Mode
4-29 NWA-033628-001 Rev.1.0
[Implement] Category
STEP4: Right-click on the vacant slot on which you want to register an additional blade in Blade Dis-
play Area.
Right-click menu is displayed.
STEP5: On the right-click menu, click the blade mounted in the slot in the SV8300.
The blade name is displayed on the corresponding slot in the Blade Display Area.
Continued on next page
Right-click menu Description
Telephone (LC) Choose one of the following combination of LC blade mounted:
• LC(4+4) : CD-4LCA + PZ-4LCA
• LC(4) : CD-4LCA
• LC(4+8) : CD-4LCA + PZ-8LCE
• LC(8+4) : CD-8LCA + PZ-4LCA
• LC(8+8) : CD-8LCA + PZ-8LCE
• LC(8) : CD-8LCA
• DIOP(LLC): CD-4DIOPA/CD-4DIOPB
Telephone (DLC) Choose one of the following combination of DLC blade mounted:
• DLC(16) : CD-16DLCA
• DLC(8+8): CD-8DLCA + PZ-8DLCB
•DLC(8) : CD-8DLCA
Right-click
Menu
To Next Page
Loading...
