Chapter 4 Standard Mode
4-30 NWA-033628-001 Rev.1.0
[Implement] Category
STEP6: Click the [Apply] button.
A dialog box appears to let you know the blade reset when selecting a blade required the
blade reset.
STEP7: Click the [Yes] button.
Right-click menu Description
Telephone (ILC) Choose one of the following combination of BRT blade (ILC):
• ILC(2+2) : CD-2BRIA + PZ-2BRIA
• ILC(2) : CD-2BRIA
Trunk (COT/DID/LD/
OD)
Choose one of the following combination of COT blade (Central office
trunk) or DIOP/ODT blade (analog leased line trunk) mounted:
• COT(4+4) : CD-4COTB + PZ-4COTF
• COT(4) : CD-4COTB
• ODT(4) : CD-4ODTA
• DIOP(DID): CD-4DIOPA/CD-4DIOPB
• DIOP(LD) : CD-4DIOPA/CD-4DIOPB
Trunk (BRT) Choose one of the following combination of BRT blade (BRI trunk)
mounted:
• BRI(4+4) : CD-2BRIA + PZ-2BRIA
• BRI(4) : CD-2BRIA
Trunk (PRT/DTI/CCT/
QSIG)
Choose one of the following combination of PRT blade (PRI trunk) or
DTI/ CCT blade (digital leased line /No.7 common signaling network
trunk):
• PRT(PRT) : CD-PRTA
• CCT : CD-CCTA
•PRT(DTI) : CD-PRTA
•PRT(QSIG): CD-PRTA
CSI Choose the CSI blade mounted.
• CSI(4): CD-4CSIB
Other Choose the VM00 blade mounted.
• VM00: CD-VM00
[Yes] button
To Next Page
Loading...
