Chapter 4 Standard Mode
4-72 NWA-033628-001 Rev.1.0
[Maintenance] Category
STEP2: Click the [Setting of Read Item] button.
A screen is displayed, allowing you to select items to be read out from the SV8300.
STEP3: Check items (1) to (4) as needed.
No. Item Description
(1) [Read] button Click to read a system configuration information from the SV8300.
(2) System Configuration
Display field
Displays the read items set currently.
(3) Set Read Items button Click to change the read items.
(4) Report Display button Click to display the system configuration information again or con-
firm the information in off-line (Same as Report. Page 7-1 )
(1)
(2)
(3)
(4)
[OK] button
To Next Page
Loading...
