Chapter 4 Standard Mode
4-87 NWA-033628-001 Rev.1.0
[Maintenance] Category
STEP6: Click the [Yes] button.
The system data loaded into the SV8300 is written to flash ROM, and a system reset is exe-
cuted. A dialog box is displayed, notifying the completion of the system reset.
STEP7: Click the [OK] button.
You are directed back to the [Load] screen.
STEP8: Click the [<< Back] button.
You are directed back to the [System Data Save/ Load/ Verify] screen.
The system data has now been loaded.
[Yes] button
[OK] button
To Next Page
Loading...
