Chapter 4 Standard Mode
4-95 NWA-033628-001 Rev.1.0
[Maintenance] Category
STEP3: Select the Unit No. and Slot No. to be reset, then click the [Reset] button.
A dialog box appears to let you know whether the blade is reset or not.
STEP4: Click the [Yes] button.
When the blade reset process completes, a dialog box appears to alert you to the completion.
STEP5: Click [OK] button.
The blade reset is now complete.
No. Item Description
(1) Unit No. Select the Unit No. of blade to be reset.
• 01 to 50 (default: 01)
(2) Slot No. Select the Slot No. of blade to be reset.
• 01 to 18 (default:01)
(3) [Reset] button Click to execute the blade reset.
[Yes] button
[OK] button
To Next Page
Loading...
