Chapter 7 Report
7-4 NWA-033628-001 Rev.1.0
System Data
System Data
Displays the System Data report of each command read out from the SV8300.
NOTE: To do the System Data report, the read out of system data is required beforehand by clicking
the [Read] button on the [System Data Mode] screen. Page 5-1
STEP1: On the main menu, click [Tools] > [Reports] > [System Data] in this order.
The [Open File] dialog box appears.
The report files of each command are stored in the folder of Connection Accounts.
To Next Page
Loading...
