Chapter 8 Settings
8-12 NWA-033628-001 Rev.1.0
Environmental Setup
Whole Setting
The Whole Setting is register IP address and Control Connection Port of FTP Server.
STEP1: On the Main Menu, click [Tools] > [Settings] > [FTP Server Settings] in this order.
The [FTP Server Settings] screen is displayed.
STEP2: Click the [Whole Setting] menu.
No. Item Description
(1) IP Address field Enter or select the IP address of the FTP Server.
(2) Control Connection Port field Enter the Control Connection Port of the FTP Server.
• Input range: 1 to 65534 (default: 21)
(3) [Apply] button Click to save the input value of the command port number.
(4) [Close] button Click the close the [Whole Setting] screen.
(2)
(4)
(3)
(1)
To Next Page
Loading...
