NEC Univerge SV8300 - Page 24

Chapter 2 Setting Up PCPro
2-8 NWA-033628-001 Rev.1.0
Connecting PCPro to the SV8300
Tips: SV8300 IP Address
Once the system data saved on the SV8300 is all cleared or PCPro has launched with default
system data, the following IP address and subnet mask are set as defaults: Step 1 can be by-
passed as long as this address is used.
<ETHERNET port> <VOIP port>
• IP address : 192.168.1.1 • IP address : 172.16.1.1
• Subnet mask : 255.255.255.0 • Subnet mask : 255.255.255.0
• TCP port : 60000 • TCP port : 60000
STEP2: Connect LAN cable between the Ethernet port on the front of the CPU blade mounted in the
SV8300 and the hub/router.
STEP3: Connect LAN cable between the PC LAN port and the hub/router.
PC (PCPro)
CPU
SV8300
LAN cable
LAN cable
(10BASE-T/100BASE-TX/1000BASE-T*)
Hub/router
LAN
ETHERNET
/VOIP
* The LAN cable (1000BASE-T) can be used
when using the VOIP port.