Chapter 2 Setting Up PCPro
2-13 NWA-033628-001 Rev.1.0
Communication Link with the SV8300
STEP4: Enter the system password.
Perform this procedure only if a system password is registered on the SV8300.
No. Item Description
(1) Connection
Account
Select a preset default account, or an account that has been set in “Connection
Account”.
• IP (LAN, Default) : An IP connection to the SV8300 which system data all
clear/standard system data has been loaded.
Select IP (LAN, Default) when IP connection (ETHER-
NET port) is used.
• IP (VoIP, Default) : An IP connection to the SV8300 which system data all
clear/standard system data has been loaded.
Select IP (VoIP, Default) when IP connection (VOIP port)
is used.
• RS-232C (9600 bps) : Select Direct connection when RS-232C connection
(direct connection) is used.
(2) System
Password
Type the system password that is preregistered with the SV8300.
(1)
(2)
[Connect] button
To Next Page
Loading...
