Chapter 4 Standard Mode
4-25 NWA-033628-001 Rev.1.0
[Implement] Category
STEP2: Click the [Confirm the System Data] button.
A listing of the settings completed by Quick Setup is saved to a file in the HTML format.
You can open the “Quick-Setup-confirm.html” to verify the setting, which displays a save
destination on the screen. As for the details of setting data, refer to the “Command Manual”.
STEP3: Click the [Write] button.
A confirm dialog box is displayed, asking confirmation to write system data to the SV8300.
STEP4: Click the [Yes] button.
After the system data has been written to the SV8300, it is saved in flash ROM and the
[Quick Setup > Completion > Write] screen appears.
[Write] button
[Yes] button
To Next Page
Loading...
