Chapter 4 Standard Mode
4-42 NWA-033628-001 Rev.1.0
[Upgrade] Category
The browser launches to display the webpage of the Software License Authentication Center.
STEP3: Log in to the Software License Authentication Center and browse through “A Guide to Using
the Software License Authentication Center” in the webpage to obtain an activation code.
Use “keyCode.act” displayed in the PBX Generator File field when obtaining the Activation
Code.
STEP4: Click the [<< Back] button in the [Acquisition of Activation Code (The Authentication Center)]
screen of PCPro.
You are directed back to the [Software License Authentication] screen.
Proceed to set the Activation Code.
<Setting an Activation Code >
STEP1: In the [Software License Authentication] screen, check the “3. Setting of Activation Code (Sys-
tem)” radio button and click the [Next >>] button.
The [Activation Code Setting] screen is displayed.
STEP2: Enter the Activation Code obtained into the Activation Code field.
[3.Setting of Activation
Code (System)] radio button
[Next >>] button
To Next Page
Loading...
