Using Advanced Features 109
Notes on using Setting information (common.txt)/User’s connection entries
list (user.txt)
Values specified in [Reconnect if all the connected sessions terminate.] and [Waiting time
till reconnection] are not distributed by connection list (user.txt). They are distributed by
settings information (common.txt).
If you select [Make the selected connection my Default Connection] while [Automatically
start the selected connection at startup.] and [Reconnect if all the connected sessions
terminate.] are specified, [Reconnect if all the connected sessions terminate.] will be
invisible (grayed out) and it will be disabled for the configured entry. However, the
settings will be saved in US110. These settings information will be distributed through
common.txt.
When using [Log-on to Terminal Connection Manager], if only a single connection entry
has been set to logon user, then this connection entry will be automatically set to startup.
Therefore, when [Reconnect if all the connected sessions terminate.] is selected, this
connection entry will be automatically reconnected.
In order to avoid such problem, uncheck [Reconnect if all the connected sessions
terminate.] before selecting [Make the selected connection my Default connection].
To Next Page
Loading...
