Getting to Know Your New Information Tool 1-11
4. Insert the battery completely into the compartment.
5. Resume the system or turn on power to continue
operation.
Inserting the secondary battery
Turning on the Versa P
Prepare to power on your system as follows.
1. Check that your power source is connected.
■ For battery power, make sure a charged battery pack
is installed in the Versa P. (See the previous section
for information about installing a battery pack.)
■ For AC power, make sure the AC adapter is plugged
into the Versa P and a wall outlet. (See “Connecting
the AC Adapter” for information about attaching the
AC adapter.)
Secondary
Battery
To Next Page
Loading...
