37
PROGRAMMING
NESS D8 (V4.7) CONTROL PANEL – INSTALLER MANUAL
RADIO KEY MONITOR ARMING
Setting this option on allows MONITOR Mode arming by Radio Key.
PROGRAMMING SE QUENCE:
P69E 5E toggles the option ON and OFF
P69E 5E OFF: Radio Key Monitor Mode Arming disabled
P69E 5E ON: Radio Key Monitor Mode Arming enabled
OPERATION:
Panel version 4 - Press the Radio Key OFF button twice within 4 seconds.
Panel version 4.5 and later - Press the Radio Key OFF button twice within 4 seconds.
or.... - Press the Radio Key ON button twice within 5 seconds.
P69E 5E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
OFF: Radio Keys cannot Arm Monitor Mode
NOTES:
• Radio Key Monitor Arming will work
only if one or more zones have been
programmed as Monitor Zones (P51E).
• When using a Radio Keypad to Monitor
arm, ensure that the ARM ONLY option
is OFF for the USER CODE on the
panel. Otherwise further MONITOR E
keypresses on the Radio keypad could
AREA arm the panel.
DISABLE MAINS FAIL ALARM
When set ON, a Mains Fail alarm is: 1. Not displayed on the keypad, 2. Does not
give warning beeps, 3. Is not saved to MEMORY and the MEMORY display does
not fl ash.
PROGRAMMING SE QUENCE:
P69E 6E toggles the option ON and OFF
P69E 6E OFF: Mains Fail alarm operates normally
P69E 6E ON: Mains Fail alarm is disabled
P69E 6E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
OFF: Mains Fail alarm normal
NOTES:
This does not affect Dialler mains
fail reporting or saving to the History
memory or operation of the Mains Fail
output on the Output Expander.
RK4 RADIO KEY PULSES AUX2 OUTPUT
These two options select the RK4 radio key AUX button to the AUX2 output.
PROGRAMMING SE QUENCE:
P69E 7E & 8E toggles the option ON and OFF
P69E 7E when selected on, toggles the panel’s AUX 2 output when the AUX button is
pressed on the Ness RK4 Radio Key.
P69E 8E when selected on, pulses the panel’s AUX 2 output when the AUX button is pressed
on the Ness RK4 Radio Key.
P69E 8E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
7E & 8E OFF
NOTES:
See page 9 for further notes on the use of
the AUX outputs.
Also see P68E 3E, 4E, 7E (Radio Keys to
Aux1 output)
RK4 RADIO KEY TOGGLES AUX2 OUTPUT
P69E 7E
Table: RADIO KEY TO AUX2
P69E
7E 8E
AUX2 disabled ON ON
AUX Toggles AUX2 ON OFF
AUX Pulses AUX2 OFF ON
AUX2 disabled OFF OFF
Note 1: If both 7E & 8E are on, then the output
is disabled.
Note 2: AUX2 can be disabled for use by a
radio key, but other panel options can be
programmed to trigger the output.
To Next Page
Loading...
Need help?
General
