Ness ECO8x - Aux1 Output Options

AUX1 OUTPUT = SMOKE DETECTOR POWER
When this option is enabled the AUX1 output can be used to provide power for latching
smoke detectors which require power interruption to reset.
The AUX1 output is momentarily interrupted for 5 seconds by pressing
1 [User code] E (or just 1E if the short arm P62E 4E option is enabled).
PROGRAMMING SEQUENCE:
P65E 1E turns the option ON
The option is toggled off by selecting a different P65E option for Aux1.
P65E 1E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
OFF.
NOTES
The AUX1 output can supply 200mA
max. An external power supply should
be added if the total current draw of
equipment connected to AUX1 exceeds
150mA.
AUX1 Smoke Detector Power AUX1 is Area1 armed output AUX1 toggles on Radio Key AUX AUX1 pulses on Radio Key AUX
Option No. Description
1E 2E 3E 4E 5E 6E 7E 8E
P65E
AUX1 OUTPUT OPTIONS
ON
Select one output type for AUX1.
AUX1 OUTPUT = AREA1 ARMED OUTPUT
When this option is enabled the AUX1 output turns on when Area1 is armed and turns
off when the panel is disarmed. The output can be optionally programmed to output a
momentary pulse on arming, see P69E 1E.
PROGRAMMING SEQUENCE:
P65E 2E turns the option ON
The option is toggled off by selecting a different P65E option for Aux1.
P65E 2E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
OFF.
RELATED OPTIONS
P69E 1E Arm1 output pulses.
P65E 3E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
OFF.
NOTES
When this option is enabled, the Radio
Key/s Panic button will no longer
generate a Panic Alarm.
P65E 4E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
ON.
AUX1 OUTPUT = TOGGLE ON RADIO KEY AUX BUTTON
When this option is on, RK4 Radio Key/s AUX button will TOGGLE the AUX1 output.
The output will operate independently of the panel's armed status, ie. disarming does
not turn Aux1 off.
PROGRAMMING SEQUENCE:
P65E 3E turns the option ON
The option is toggled off by selecting a different P65E option for Aux1.
AUX1 OUTPUT = PULSE ON RADIO KEY AUX BUTTON
When this option is on, RK4 Radio Key/s AUX button will PULSE the AUX1 output on for
approx. 2 seconds.
PROGRAMMING SEQUENCE:
P65E 4E turns the option ON
The option is toggled off by selecting a different P65E option for Aux1.
AUX1 Output on the
main terminal strip
29
Ness eCO8x CONtrOl PaNel – INstallatION MaNual
P R O G R A M M I N G