Ness ECO8x - Misc. Options

ARM1 PULSE OUTPUT
ARM1 Output will pulse on for 2 seconds whenever Area1 is armed. (Disarming does
not pulse the output).
The Pulse output is instead of the normal toggle action for ARM1 when arming/
disarming.
PROGRAMMING SEQUENCE:
P69E 1E toggles the option ON and OFF
OFF: ARM1 output toggles
ON: ARM1 output pulses
P69E 1E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
OFF.
ARM2 PULSE OUTPUT
ARM2 Output will pulse on for 2 seconds whenever Area2 is armed. (Disarming does
not pulse the output).
The Pulse output is instead of the normal toggle action for ARM2 when arming/
disarming.
PROGRAMMING SEQUENCE:
P69E 2E toggles the option ON and OFF
OFF: ARM2 output toggles
ON: ARM2 output pulses
P69E 2E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
OFF.
QUIET HOME MODE SIREN
This option selects the Quiet Siren sound in Home Mode. The Quiet Siren sound is a
continuous “beep beep beep” sound rather than the normal siren sound.
PROGRAMMING SEQUENCE:
P69E 3E toggles the option ON and OFF
OFF: Normal siren sound in Home Mode
ON: Quiet Siren sound in Home Mode
P69E 3E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
OFF.
NOTES
This does not affect the RESET output.
ARM1 pulse output
ARM2 pulse output
Quiet Home siren Radio Key arming of Home Mode Disable Mains Fail alarm Home Mode Chirps Home Arm by Radio Key AUX Button
Option No. Description
1E 2E 3E 4E 5E 6E 7E 8E
P69E
MISC. OPTIONS 2
32
Ness eCO8x CONtrOl PaNel – INstallatION MaNual
P R O G R A M M I N G