TELEPHONE NUMBER – CALLBACK
This telephone number is used to prevent unauthorised up/download.
The panel will dial the callback telephone number to commence a NessComms™
up/download session.
NessComms™ up/download without callback is allowed by turning off option P90E 8E.
PROGRAMMING SEQUENCE:
P81E existing telephone number is displayed
[ENTER NEW TELEPHONE No] E new Telephone No. is displayed one digit at a time
P81E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
None.
RELATED OPTIONS
P90E 8E Enable Callback.
TELEPHONE NUMBERS 1 & 2
The panel can dial up to 2 phone numbers when an event is to be transmitted to a
central monitoring station or other location. Telephone numbers may be up to 30 digits
in length.
PROGRAMMING SEQUENCE:
P70E existing telephone number is displayed one digit at a time
[ENTER NEW TELEPHONE No] E new telephone number is displayed one digit at a time
EXAMPLE: To program Telephone No.1 to be 03 1234 1234:
P 70 E 0312341234 E
TO CLEAR A TELEPHONE NUMBER
To clear a telephone number, enter the MEMORY key in place of the telephone number.
Example, to clear a Telephone Number 1 press: P70E MEMORY E
P70E, P71E
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
None.
NOTES
• If telephone number 2 is disabled, all
calls are made on telephone number 1
and the setting of P87E 1E has no effect.
• When programming, any keypress will
interrupt the telephone number display
sequence.
RELATED OPTIONS
P87E 1E Alternate Primary/Secondary
telephone numbers.
P86E 1E Disable dialler (still allows
remote up/download if programmed).
SPECIAL CHARACTERS (Applies to all telephone Numbers)
Pauses, * (star) or # (hash) (VF digits) can be included in the dialling sequence by
using the keys in the table below.
SPECIAL CHARACTER KEY ENTRY KEYPAD DISPLAY
PAUSE (1.6sec) ARM Key 12
* (Star)
Home Key 10
# (Hash) EXCLUDE Key 11
Option No. Description Default
P70E TELEPHONE NUMBER 1 - PRIMARY
P71E TELEPHONE NUMBER 2 - SECONDARY
P81E
TELEPHONE NUMBER - CALLBACK FOR UPLOAD
P72E
CLIENT ACCOUNT NUMBER
0000