FXS Gateway Overview
- 83 -
LABEL DESCRIPTION
is on, VoIP Gateway will send H.245 (Call Control messages) via
H.225’s (Call Signal messages) link. The function is effective only
when both side support h245 tunnel.
H.245 Message
After Fast Start
Select enable/disable for H.245 Message After Fast Start function.
If the function is ON, VoIP Gateway will send H.245 messages after
Fast Start.
Early H.245 Select enable/disable for Early H.245 Message. The function is
effective only when both sides support early H.245.
H.450 Select enable/disable for H450 related features, which include
transfer, hold and forward.
OK [button] Click [OK] button to save your changes back to the VoIP Gateway
volatile memory.
Note:
It is not recommended to change the value in this web, only if users do know well
the application. This might cause incompatibility with other devices.
To Next Page
Loading...
