FXS Gateway Overview
- 33 -
Chapter 3
Initial Configuration
This Chapter covers the basic configuration needed to set up and use the VoIP
Gateway. Refer to the other part describes about individual fields within
screens.
3.1 Initial Configuration Overview
This chapter describes the procedure for the initial configuration of the
VoIP Gateway. Refer to the relevant chapters in this User’s Guide for
descriptions of the fields and buttons within individual screens.
3.2 General Configuration
The VoIP Gateway the factory with a default IP address of 10.1.1.3 and a
subnet mask of 255.0.0.0, default gateway of 10.1.1.254.
3.3 Static IP address
Step 1. Configuration the VoIP Gateway IP address. Click [Network Interface]
on the navigation panel. In the Network Interface screen, type a new IP
address, subnet mask and the default routing gateway (e.g. IP Address:
192.168.13.80, Subnet mask: 255.255.248.0, Default routing gateway:
192.168.8.254) and click the OK button.
To Next Page
Loading...
