Netgate FXS Series - Chapter 4 Making a Voip Call; Configure the Gateway into the Peer-To-Peer Mode

FXS Gateway Overview
- 48 -
Chapter 4
Making a VoIP Call
This Chapter covers the basic configuration the gateway for making VoIP calls.
One is the Peer-to-Peer mode, another is GK routed mode. The configurations
and functions are different. Please make sure about the mode you want and
follow up the step to configure your gateway.
4.1 Configure the gateway into the Peer-to-Peer mode
Step 1. Configuration the VoIP Gateway H323 Configuration. Click [H323
Configuration] on the navigation panel. In the H323 Configuration screen,
select Peer-to-Peer Mode function, set line number (e.g. Line1 Number
3001, Line2 Number: 3002) and click the [OK] button.