FXS Gateway Overview
- 31 -
LABEL DESCRIPTION
(FXO Gateway only).
FXO Password This link takes you to a screen. When will set use FXO
password (FXO Gateway only).
2.5 Saving Your Configuration
Click OK to save your changes back to the VoIP Gateway volatile memory.
The VoIP Gateway loses these changes if it is turned off or loses power, so
use the Commit Data link on the navigation panel to the left to save your
changes to the non-volatile memory when your are done configuring.
2.6 Navigating the Web Configuration
The web configuration uses one level. For example, to configure [Network
Interface], click the link on the navigation panel to open the configuration
screen.
To Next Page
Loading...
