Netgate FXS Series - Configure the Gateway into the GK Routed Mode

FXS Gateway Overview
- 52 -
4.2 Configure the gateway into the GK routed mode
4.2.1 Gateway Type: Gateway
Step 1. Configuration the VoIP Gateway H323 Configuration. Click [H323
Configuration] on the navigation panel. In the H323 Configuration screen,
select GK routed Mode function.
Step 2. To change the GK information from your service provider Gatekeeper
IP, 2nd Gatekeeper IP, Gateway Type, Registered Prefix, Line1 Number,
Line 2 Number, Line 3 Number and Line 4 Number (e.g. Gatekeeper IP:
192.168.13.71, 2nd Gatekeeper IP: 192.168.13.71, Gateway Type:
Gateway, Registered Prefix: 300, Line1 Number: 3001, Line2 Number:
3002, Line3 Number: 3003, Line 4 Number: 3004), and click the [OK]
button.