FXS Gateway Overview
- 82 -
Table 10-1 Support Configuration
LABEL DESCRIPTION
T.38 FAX Select enable/disable for T.38 FAX function. When T.38 ability is
on, VoIP Gateway will automatically defer codec (G.723 or G.729a)
to T.38 when FAX signal is detected.
T.38 FAX Request
Mode
Enable or Disable the T.38 Request function. Enable this function
will let the gateway establish the FAX connection more fast.
T.38 FAX ECM Select enable/disable for T.38 FAX ECM function. Support the error
correction in the high speed fax mode
T.38 FXS ASN.1 Select enable/disable for T.38 FXS ASN.1. Support the ASN.1
function.
Fax Redundancy
Depth
Select enable/disable for Fax Redundancy Depth. This support
function could make the data for the FAX sending for twice. But this
will take more bandwidth (0~2).
Fast Start Select enable/disable for Fast Start function. Fast Start function
can shorten the connection time if the opposite party also supports
Fast Start.
H.245 Tunneling Select enable/disable for H.245 Tunneling function. If the function
To Next Page
Loading...
