Netgate FXS Series - Figure 24-10 Debug -Status Commend

Command with FXS Gateway
- 163 -
-close: Stop showing debug messages.
In this example, user open debug flags including h323, vp, h323vp.
usr/config$ debug -add h323 vp h323vp
usr/config$ debug –open
For example:
usr/config$ debug -status
Current debug type enabled :
Debug Mode is open
DEBUG-> H323VP H323
usr/config$
Figure 24-10 debug –status commend
24.7.3 [reboot]
After [commit] command, type [reboot] to reload Gateway in new configuration.
The procedure is as below:
usr/config$ reboot