Netgate FXS Series - DHCP Mode; Figure 3-3 Reboot Voip Gateway

FXS Gateway Overview
- 36 -
Figure 3-3 Reboot VoIP Gateway
Step 4. Close the current browser windows and launch your web browser
again. Enter the new IP address in the Location or Address field.
3.4 DHCP mode
Step 1. Configuration the VoIP Gateway IP address for DHCP Mode. Click
[Network Interface] on the navigation panel. In the Network Interface
screen, enable the DHCP function if you are using the cable modem or
DHCP server and click the [OK] button.