Netgate FXS Series - Figure 3-6 Enable the IP Sharing Function

FXS Gateway Overview
- 43 -
Figure 3-6 Enable the IP sharing function
Step 9. Click [Commit Data] on the navigation panel. In the Commit
Configuration Data screen, click the Commit button. In the Commit
Configuration Data screen to Display [Commit to Flash OK!], When the
Commit Data Ok.
Step 10. Click [Reboot System] on the navigation panel. In the VoIP Gateway
screen, click the [Reboot] button. It will take 40 seconds to reboot.
Step 11. Close the current browser windows and launch your web browser
again. Enter the new IP address in the Location or Address field.