FXS Gateway Overview
- 12 -
LEDs Functions Indicator
Status
Active Description
Off The 10M LAN is not connected.
1.6.3 2AFXS LEDs
The following table describes the LED functions:
Table 1-3 2AFXS LEDs Functions
LEDs Functions Indicator
Status
Active Description
LAN Switch to another device, such as
PC
Link/ACT Link/ACT Green Blinking While plugging on the Ethernet
cable, it must light on and the flash if
some data is being TX/RX.
OFF The Ethernet cable is not connected.
10/100M LAN Green Off The 10M LAN is connected.
On The 100M LAN is connected.
WAN Uplink to the HUB/Router directly.
Link/ACT Link/ACT Green Blinking While plugging on the Ethernet