Netgate FXS Series - Figure 24-49 Passwd Commend List

Command with FXS Gateway
- 229 -
Example:
passwd -set root Your_Passwd_Setting
passwd -clean
usr/config$
Figure 24-49 passwd commend List
Parameter Usages:
–set: Set login name and password, input login name then input new password.
-clean: Will clear all password setup, and change null.
Note:
Gateway Login name only use [root] or [administrator]. [root] and [administrator]
have the same authorization, except commands that can be excuted by [Login name:
root] only [passwd –set root], [rom –boot], [room-boot2m] and [flash –clean].
For example:
usr/config$ passwd -set root root1234