Netgate FXS Series - Figure 13-1 Phone Configuration; Table 13-1 Phone Configuration

FXS Gateway Overview
- 95 -
Figure 13-1 Phone Configuration
The following table describes this screen.
Table 13-1 Phone Configuration
LABEL DESCRIPTION
Ring Cadence Setting the played tone type, when VoIP Gateway is receiving a
call.
Ring Back Tone Setting the played tone type, when VoIP Gateway receives a Q.931
Alerting message. In condition that VoIP Gateway is the originate
side.
Busy Tone Setting the played tone type, when destination is busy.
Dial Tone Setting the played tone type, when hook off a phone set of
workable VoIP Gateway.
2nd Dial Tone To configure the value of the local 2nd dial tone (FXO only).
Flash Timer
Setting the detective flash range in ms, for example, 300-500 ms.
OK [button] Click [OK] button to save your changes back to the VoIP Gateway
volatile memory.
Note: