Netgate FXS Series - Figure 24-14 Commit Commend

Command with FXS Gateway
- 168 -
Figure 24-14 commit commend
Note:
Users shall use [commit] to save modified value, or they will not be activated after
system reboot.
24.7.6 [ifaddr]
Configure and display Gateway network information.
LAN information and configuration
Usage:
ifaddr [-print][-mode used][-ip IP Address][-mask Subnet Mask]
[-gate Default Gateway][-dns 1 IP Address][-http portnumber]
[-lanip IP Address][-sntp mode [server]][-timezone GMT]
[-ipsharing used IP address][-ipchange used][-id PPPoE username]
[-pwd PPPoE password][-reboot used]
-print Display network information and configuration.
-mode Specify WAN IP mode (0=Static, 1=DHCP, 2=PPPoE).
-ip Specify WAN port static IP address.