Netgate FXS Series - Command Structure with Gateway; Figure 24-7 Password -Set Command

Command with FXS Gateway
- 128 -
usr/config$
Figure 24-7 password –set command
24.3 Command Structure with Gateway
24.3.1 Setup IP Address
Use command [ifaddr] to configure Gateway IP Address and related information.
For example:
Step 1. Setting ip address
usr/config$ ifaddr –ip 192.168.1.11 –mask 255.2555.255.0 –gate 192.168.1.254
Description:
This is to configure Gateway IP Address as [192.168.1.11], subnet mask as
[255.255.255.0], default router gateway as [192.168.1.254].
Step 2. Ather the configuration [commit] and [reboot] the device.
usr/config$ commit
usr/config$ reboot
Note:
After configured the IP Address and input the [commit], then [reboot] process,
user can start to do other configurations via HTTPD.