Netgate FXS Series - Figure 24-41 Tos Commend List

Command with FXS Gateway
- 218 -
tos [-print][-rtptype dscp][-sigtype dscp]
tos -print Display IP packet Tos configuration.
-rtptype The packages of voice (0~63).
-sigtype The package of call signal (0~63).
Example:
tos -rtptype 7 -sigtype 0
usr/config$
Figure 24-41 tos commend list
Parameter Usages:
-rtptype: the packages of voice (0~63).
-sigtype: the package of call signal (0~63).
Note:
The value of rtptype and sigtype is from 0 to 63. It’s working if it supported by your
network.