Netgate FXS Series - Figure 24-28 Pbook Commend List

Command with FXS Gateway
- 197 -
usr/config$
Figure 24-28 pbook commend list
Parameter Usages:
-print: Print out current contents of Phone Book. Users can also add index number,
from 1 to 100, to the parameter to show specific phone number.
Note:
Index number: means the sequence number in phone book. If users do
request a specific index number in phone book, Gateway will give each record a
automatic sequence number as index.
-add: add a new record to phone book. When adding a record, users have to specify
name, IP, and e164 number to complete the command.
--name: Name to represent caller.
--e164: e.164 number for mapping with IP address of caller
--ip: IP address of caller
--port: Call signal port number of caller
--drop : Drop e.164 number when dial out. 0 means to keep e.164 number, 1
means to drop e.164 number when dialing out.
--inert: Insert digits.(1~10 digits)