Netgate FXS Series - Figure 24-21 H323 Commend List

Command with FXS Gateway
- 183 -
response of a new call (1~20000).
Note:
Range of IP address setting (0.0.0.0 ~ 255.255.255.255).
Example:
h323 -gk 210.59.163.171 -line1 70 -line2 71 -line3 72 -line4 73
h323 -alias Your_Alias_Name -gkid GK -gkdis 1 -passwd 1234
usr/config$
Figure 24-21 h323 commend list
Parameter Usages:
-print: Print current h323 related settings
-mode: Alternatives for gatekeeper or peer-to-peer mode (0=gatekeeper mode;
1=peer-to-peer mode). If users select gatekeeper mode, an extra gatekeeper
is needed when Gateway is in operation.
usr/config$ h323 –mode 1 (peer to peer mode)
-gk: Assign gatekeeper’s IP address when Gateway is in gatekeeper mode.
-algk: Assign second gatekeeper’s IP address as redundancy. If Gateway fails to
register to main GK for 10 times, it will try to register to alternative GK.