Netgate FXS Series - Figure 24-19 Sysconf Commend List

Command with FXS Gateway
- 177 -
-prefixdisab Local zone prefix disable character (one character
from 0~9, *, or NONE('-' key)).
-usrdefprefix User defined local zone prefix (0 ~ 20 digits).
-codec Codec select method (0=Caller, 1=Master).
-localrbt Local ring back tone (0=Disable, 1=Enable).
-gwprefix Drop gateway prefix when call from IP (0=Keep, 1=Drop).
-eod End of dial (0=Disable, 1=Enable).
Example: sysconf -idtime 5
usr/config$
Figure 24-19 sysconf commend list
Parameter Usages:
-print: Print current sysconf settings.
-idtime: Set the duration (in second) of two pressed digits in dial mode as timed out. If
after the duration user hasn’t pressed next number, it will dial out all number
pressed (1-10 seconds).
-forwardtime: Set forward time (5-65535 seconds) for FXS Line. If call hasn’t answered
the call in this time, call will be forward to assigned number in [line] command.